Loxone Valve Actuator Air

Intelligent temperature control at its best

With Loxone Valve Actuators, every room can be set to a different temperature, and unlike a smart thermostat, each and every room in your home can be controlled independently of the other, meaning even bigger savings on your heating bill!

More about Smart Heating

Control heating and cooling

The Loxone Valve Actuator isn’t just for heating. It can also be used to control cooling and fan coil units, which means it’s perfect for hotels, offices, schools and shops in addition to homes.

Easy to set up

Fit the Valve Actuator on the radiator valve or on the heating manifold, then power it by inserting batteries or providing a 24V connection (Air) or wiring it in (Tree). The actuators are automatically detected in Loxone Config and are completely configured within minutes.

Integrated temperature sensor

The integrated temperature sensor (Loxone Valve Actuator Air only) can measure the room temperature accurately and be used to control it precisely.

Quiet motor

The actuator is equipped with an advanced stepper motor. This keeps any movement noise to a minimum.

Compatible with most valves

You will receive the valve actuator with a standard valve adapter (VA80) which is compatible with many popular heating valves. Moreover, we offer additional adapters as accessories in our webshop.

Button for function of your choice

The Valve Actuator Air has an in-built button on the top which can be used according to your preference – for instance, switching to heating mode, or as a boost button for a little extra warmth.

More Valve Adapters

Integrated status LED

The bicolour LED gives information about the status of the actuator.

Installation and configuration

The right technology for every application. Thanks to the Loxone Air and Tree technology, the actuator is installed and commissioned in just a few minutes. The actuator is available in the following versions:

Loxone Tree

The topology of Loxone Tree gives you the flexibility to wire your actuators in the way that best suits your project. The actual wiring takes mere minutes: Pull the cable from actuator to actuator, use the Tree tool* to insert cables into the punch down connectors, and you’re done!

*The Tree tool is included with the Tree Extension.

Loxone Air

With the option to power the Valve Actuator Air with batteries or 24V, there’s no need to wire if you don’t want to. The sophisticated stepper motor in the Valve Actuator Air is not just quiet, it is also energy-optimised to ensure a long battery life of up to 2 years.