Purchase

Loading...
Loxone Nano IO Air Zoom

Nano IO Air

Item no.: 100153

The Loxone Nano IO Air is the ideal retrofit option if you're looking to automate your lighting, blinds, push buttons and more! The flush-mounted unit makes this possible with its two powerful 5A relays and six digital inputs

  • Ideal for automating lighting without chasing walls
  • 2 powerful 5A relays
  • 6 digital inputs
  • CE certified and tested
  • Works over Loxone Air – perfect for retrofitting
$ 129.00
Incl. 0% Tax, excl. shipping
Out of stock

INTEGRATION OF BLINDS, LIGHTING AND MORE!

Two powerful 5A relays allow you to automate your lighting, blinds and more. With built-in wireless technology, the Loxone Nano IO Air is quickly and easily integrated into your Smart Home with minimum fuss*. It’s ideal for retrofitting.

Find Your Local Loxone Partner

*All wiring should be undertaken by a professional.

Integration of Nano IO Air into the Loxone Smart Home
Integrated Inputs of Nano IO Air

INTEGRATED INPUTS FOR PUSH BUTTONS AND MORE

The Nano IO Air has six digital inputs for the connection of push buttons, door contacts, water sensors and other 24V digital sensors.

FITS PERFECTLY BEHIND THE SWITCH

With dimensions of 53 x 53 x31mm, the Nano Air IO will fit happily in the cavity behind most switch plates.

Fits perfectly behind the switch
Made for Loxone Touch

LOXONE TOUCH MADE FOR NANO IO AIR

The Loxone Touch for Nano is the add-on touch switch module for IO Loxone Nano Air. With a capacitive surface, five touch points and optional audible click feedback, the Touch for Nano is ideal for retrofitting alongside the Nano IO Air.

CERTIFIED & TESTED

The new Nano IO Air was – like all our products – developed in compliance with CE standards. It therefore meets the highest safety standards. Our hardware development team have worked hard to produce a compact module that boasts the maximum safety compliance.

Loxone Certified
Low Energy Consumption

LOW ENERGY CONSUMPTION

All Loxone Air Products are designed to use as little energy as possible. In standby mode, the consumption of Nano IO Air is only 0.5 W.

Technical Data

Power Supply:

110-230V~, 50/60Hz, 10A max.

Digital Outputs:

2 digital outputs (switching voltage) 5A at cosφ=1

Digital Inputs:

6 digital inputs 24V DC (SELV)

Frequency:

868MHz (SRD Band Europe), 915MHz (ISM Band Region 2)

Power consumption:

typically 0.5 W

Dimensions:

53 x 53 x 31mm / 2.08″ x 2.08″ x 1.2″

Operating Temperature:

0-35°C / 32-95°F

Max. relative humidity:

95% (non-condensing)

Protection:

IP20

Operation:

Type 1 (EN60730-1)

Rated surge voltage:

2.5kV (EN60730-1, max. height 2000m)

Pollution degree:

2

24VDC 1W output for sensors

Based on Loxone Air Technology

Onboard Microprocessor

Delivery

1x Nano IO Air

$ 129.00
Incl. 0% Tax, excl. shipping